@article { author = {Mokhtari, zahra and Seifi, Aliye}, title = {Detection of Hydrothermal Alteration Zones Using ASTER Remote Sensing Data in Turquoise mine of Neyshabur}, journal = {Journal of Analytical and Numerical Methods in Mining Engineering}, volume = {11}, number = {28}, pages = {1-22}, year = {2021}, publisher = {Yazd University}, issn = {2251-6565}, eissn = {2676-6795}, doi = {10.22034/anm.2021.2031}, abstract = {Summary The world-class Neyshabur turquoise mine is hosted by a Tertiary volcano-sedimentary sequence that belongs to the Binaloud zone, in northeastern Iran. Binaloud Mountain has experienced a complicated geological history and several tectono-magmatic periods as a result of its especial tectonic setting. Continuing compression in Late Alpine orogeny deformed the magmatic rocks and brought extensive alteration in this belt. Based on field-experimental studies, the lithological units of the turquoise mine area of Neyshabur can be divided into three sections: volcanic rocks, subvolcanic rocks, and different types of breccia. Andesite, trachyandesite, trachyte lavas, and pyroclastic rock units of the Eocene are among the most important in the study area. These rocks have undergone intense alteration due to the intruded of subvolcanic intrusive bodies. The extent and intensity of the alteration are significant in volcanic and intrusive rocks of this region. The main objectives of this study are to detect and mapping of hydrothermal alteration zones using ASTER data and field studies for future explorations of turquoise mineralization.   Introduction Hydrothermal alteration zones have a significant role in the prospecting of mineral deposits. The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) contains appropriate spectral and spatial resolution to detect spectral absorption features of hydrothermal alteration minerals. The highly brecciated and altered part of andesite, trachyandesite, and trachyte units is the main host of high quantity and quality veins, veinlets, and concretion of turquoise in the study area. Therefore, mapping and identification of hydrothermal alteration mineral assemblages using ASTER satellite remote sensing data can be considered as a cost-effective and applicable tool for targeting and prospecting this mineralization.   Methodology and Approaches                                                                                              Image processing techniques were applied on the digital subset ASTER data covered the turquoise mine area of Neyshabur. Recognition of hydrothermally altered rocks was carried out using color composite images (RGB), ratio images (BR), relative absorption band depth (RBD), matched filtering (MF), and spectral angle mapper (SAM). The results obtained in this section were controlled by field studies.   Results and Conclusions The mentioned image processing techniques and field studies have been successfully used in the mapping of hydrothermal alteration zones in the study area. According to the outcome of ASTER image processing and field studies, hydrothermal alterations zones could be classified into five groups: silicic-gossan, serisitic, propylitic, advanced argillic, and argillic zones that silicic-gossan and advanced argillic zones forming the most and least extent in alterations zone respectively. The MF algorithm shows very clearly the gossan altered zones in the study area. Moreover, the results indicate that the SAM method is promising for identifying serisitic, propylitic, advanced argillic, and argillic zones and can assist exploration geologists to find new prospects of turquoise mineralization in the other regions before costly detailed ground investigations. The results obtained from image processing are also consistent with the results of field studies petrographic.}, keywords = {Hydrothermal alteration,ASTER,Turquoise mine,Remote Sensing,Neyshabur}, title_fa = {بارزسازی مناطق دگرسان شده با استفاده از روش‌های مختلف پردازش تصاویر ASTER در منطقه معدن فیروزه نیشابور}, abstract_fa = {معدن فیروزه نیشابور در یک توالی آتشفشانی - رسوبی ترشیری مربوط به زون بینالود در شمال شرق ایران واقع شده است. بر اساس مطالعات صحرائی – آزمایشگاهی، واحدهای سنگی آندزیت، تراکی­آندزیت، تراکیت و پیروکلاستیک متعلق به ائوسن مهم‌ترین واحدهای سنگی منطقه مورد مطالعه را تشکیل می­دهند. دگرسانی­های سیلیسی، سریستی، آرژیلی و گوسان اغلب این سنگ­ها را تحت تأثیر قرار داده است. توالی­های شدیداً خردشده و دگرسان شده از واحدهای آندزیتی، تراکی­آندزیت و تراکیت میزبان اصلی رگه­ها، رگچه­ها و دانه­های باکیفیت و کمیت بالا از فیروزه هستند؛ بنابراین، شناسایی و نقشه­برداری کانی­های شاخص دگرسانی­های گرمابی با استفاده از دورسنجی داده­های ماهواره­ای استر می­تواند به‌عنوان ابزاری مقرون‌به‌صرفه و قابل‌استفاده برای شناسایی و پی­جویی کانی­زایی فیروزه در نظر گرفته شود. در این پژوهش بارزسازی زون­های دگرسانی گرمابی با استفاده از تکنیک­های تصاویر رنگی کاذب (RGB)، نسبت باندی (BR)، نسبت گیری باند جذب نسبی (RBD)، پالایش تطبیقی (MF) و نقشه‌بردار زاویه طیفی (SAM) روی تصاویر استر صورت گرفته است. بر اساس پردازش­های انجام‌شده و مطالعات صحرایی، زون­های دگرسانی گرمابی را می­توان به پنج گروه تقسیم کرد: زون­های سیلیسی – گوسان، سریستیک، پروپیلیتک، آرژیلیک و آرژیلیک پیشرفته. الگوریتم MF به‌وضوح پهنه­های دگرسانی گوسان در منطقه مورد مطالعه را بارز نمود. علاوه بر این روش SAM نیز برای شناسایی زون­های دگرسانی سریستیک، پروپیلیتک، آرژیلیک و آرژیلیک پیشرفته نتایج بهتری را نشان داد و ازاین‌رو می­تواند زمین­شناسان را برای یافتن اندیس­های جدید از کانی­زایی فیروزه در مناطق دیگر پیش از بررسی­های میدانی دقیق و پرهزینه کمک کند.}, keywords_fa = {دگرسانی گرمابی,استر,معدن فیروزه,سنجش از دور,نیشابور}, url = {https://anm.yazd.ac.ir/article_2031.html}, eprint = {https://anm.yazd.ac.ir/article_2031_7624d1ae1af227f1a664ca6059fdc26f.pdf} }