[1] Soroush A, Tabarsaz S., (2010), "Numerical analysis of ground reinforced with a stone column group", IQBQ., 10 (2).
[2] FHWA, (1983), “Design and construction of stone column”, Volume I, Report No. FHWA/RD-83/026.
[3] Wu, C. S., and Hong, Y. S. (2008), “The behavior of a laminated reinforced granular column”, Geotextiles and Geomembranes, Vol. 26, pp. 302–316.
[4] Wu, C. S., Hong, Y. S., and Lin, S. C., (2009), “Axial stress strain relation of encapsulated granular column”, Computers and Geotechnics, Vol. 36, pp. 226–240.
[5] Hu, W., Wood, D.M. and Stewart, W., (1997), “Ground improvement using stone column foundations: result of model tests”, Int. Conf. on Ground Improvement Techniques, pp.247-256.
[6] Malarvizhi, S. N. and Ilamparuthi, K., (2004), “Load versus settlement of claybed stabilized with stone & reinforced stone columns”, Proceedings of the 3rd Asian Regional Conference on Geosynthetics, June 21-24, Seoul, Korea, pp. 322–329.
[7] McKelvey, D., Sivakumar, V., Bell, A., and Graham, J., (2004), “Modelling vibrated stone columns in soft clay ”,
Proceedings of the ICE - Geotechnical Engineering, Vol. 153, No. 3, pp. 137-149.
[8] Gniel, J., and Bouazza, A., (2009), “Improvement of soft soils using geogrid encased stone columns”, Geotextiles and Geomembrances, 27(3), pp. 167-175.
[9] Malekpoor, M.R., and Toufigh, M.M., (2010), “Laboratory study of soft soil improvement using lime mortar- (well graded) soil columns”, Geotechnical Testing Journal (ASTM), Vol. 16, No. 3, pp. 1-11.
[10] Dash, S.K., and Mukual C.B., (2013), “Influences of geosynthetic encasement on the performance of stone columns flooting in soft clay”, Canadian Geotechnical Journal, Vol 50, No.7, pp. 754- 765.
[11] Zdravkovic, j., and Carter, j., (2008), “Constitutive and numerical modelling”, Geotechnique, Vol. 58, No. 00, pp. 1–8.
[12] Keykhosropur L., Soroush A., and Imam R., (2012), “3D numerical analyses of geosynthetic encased stone columns”, Geotextiles and Geomembranes, Vol. 36, pp 61-68.
[13] Indraratna, B., Ngo, N.T., Rujikiatkamjorn, C., and Sloan, S.W., (2015), “Coupled discrete element–finite difference method for analysing the load-deformation behaviour of a single stone column in soft soil”, Computers and Geotechnics, Vol. 63, pp. 267–278.
[14] Potts, D.M., (2003), “Numerical analysis: a virtual dream or practical reality?”, Geotechnique, Vol. 53, No. 6, pp. 535–573.
[16] Cundall, P.A., and Strack, D.L., (1978), “The Distinct element method as a tool for research in granular media”, Minneapolis, Department of Civil and Mineral Engineering Ltd.
[17] Cundall, P.A., and Strack, D.L., (1979), “A discrete numerical model for granular assemblies,” Geotechnique, Vol. 29, No. 1, pp: 47-65.
[18] Bayesteh, H., and Mansouriboroujeni, R., (2019), "Mechanisms of settlement of a rubble mound breakwater on a soft soil in tidal flats", Marine Georesources & Geotechnology, Vol. 38, Issue 10, pp. 1163-1176.
[19] O’Sullivan, C., (2011), “Particle-Based Discrete Element Modeling: Geomechanics Perspective”, International Journal of Geomechanics,
11, Issue. 6, pp. 449-464.
[20] Khabazian, M., Mirghasemi, A.A., and Bayesteh, H., (2018), “Compressibility of montmorillonite/kaolinite mixtures in consolidation testing using discrete element method”, Computers and Geotechnics, 104, pp. 271–280.
[21] Bayesteh, H., and Mirghasemi, A.A., (2013), "Procedure to detect the contact of platy cohesive particles in discrete element analysis", Powder Technology, 244, pp. 75-84.
[22] Bayesteh, H. and Ghasempour, T., (2018), “Role of the location and size of soluble particles in the mechanical behavior of collapsible granular soil: a DEM simulation” Computational Particle Mechanics, Vol. 6, Issue 3, pp 327–341.
[23] Khabazian, M., Mirghasemi, A.A., and Bayesteh, H., (2020), “Discrete element simulation of drying effect on the volume and equivalent effective stress of kaolinite”. Geotechnique, doi.org/10.1680/jgeot.18.P.239.
[24] Bayesyeh, H., and Hosseini, A., (2021), "Effect of mechanical and electro-chemical contacts on the particle orientation of clay minerals during swelling and sedimentation: A DEM simulation", Computers and Geotechnics, Vol. 130, pp. 103913.
[25] Gu, M., Han, J., and Zhao, M., (2020), “Three-dimensional DEM analysis of axially loaded geogrid-encased stone column in clay bed”, International of Geomechanics, 20(3), pp. 1-11.
[26] Gu, M., J. Han, and M. Zhao., (2017a), “Three-dimensional DEM analysis of single geogrid-encased stone columns under unconfined compression: A parametric study.” Acta Geotech. 12 (3): pp. 559–572.
[27] Gu, M., J. Han, and M. Zhao., (2017b), “Three-dimensional discrete-element method analysis of stresses and deformations of a single geogridencased stone column.” Int. J. Geomech. 17 (9): pp. 04017070.
[28] Gu, M., M. Zhao, L. Zhang, and J. Han., (2016), “Effects of geogrid encasement on lateral and vertical deformations of stone columns in model tests.” Geosynthetics Int. 23 (2), pp. 100–112.
[29] Coetzee, C. J. "Calibration of the discrete element method." Powder Technology 310 (2017): 104-142.
[30] Bowles, J.E., (1982), “Foundation analysis and design”, McGraw-Hill, Third edition. 816 pp.
[31] Fan, H., D, Guo, J., Dong, X., Cui, M., and Zhang, Z., (2018), “Discrete element method simulation of the mixing process of particles with and without cohesive interparticle forces in a fluidized bed”, Powder Technology, Vol. 327, No. 1, p.p: 223-231.
[32]
Ciantia, M.O., Arroyo, M., O’Sullivan, C., and Gens, A., (2016), “DEM Investigation of stress and strain evolution around displacement piles in sand”, London, 2016 BGA Annual Conference.