[1] Goodman, R. E. (1989). Introduction to rock mechanics (Vol. 2). New York: Wiley.
[2] Griffith, A. A. (1924). The theory of rupture. In Proc. First Int. Congr. Appl. Mech.
[3] Bieniawski, Z. T. (1974). Estimating the strength of rock materials. Journal of the Southern African Institute of Mining and Metallurgy, 74(8), 312-320.
[4] Hoek, E. and Brown, E. T. (1989). Empirical strength criterion for rock masses. Journal of Geotechnical and Geoenvironmental Engineering, ASCE,106 (GT9), 1013-1035.
[5] Labuz, J. F., and Zang, A. (2012). Mohr–Coulomb failure criterion. Rock mechanics and rock engineering, 45(6), 975-979.
[6] Revil-Baudard, B., and Cazacu, O. (2014). Role of the plastic flow of the matrix on yielding and void evolution of porous solids: Comparison between the theoretical response of porous solids with Tresca and von Mises matrices. Mechanics Research Communications, 56, 69-75.
[7] Drucker, D. C., and Prager, W. (1952). Soil mechanics and plastic analysis or limit design. Quarterly of applied mathematics, 10(2), 157-165.
[8] Sheorey, P. R. (1997). Empirical rock failure criteria. AA Balkema.
[9] Hosseini_Nasab, H., & Fatehi Marji, M. (2007). A semi-infinite higher-order displacement discontinuity method and its application to the quasistatic analysis of radial cracks produced by blasting. Journal of Mechanics of Materials and Structures, 2(3), 439-458.
[10] Marji, M. F., Siahmansouri, A., & Yarahmadi, A. (2012) LEFM approach for the rock failure analysis around circular opening by BEM. 19th European conference on fracture proceeding, Kazan.
[11] Abdollahipour, A., Marji, M. F., Bafghi, A. Y., & Gholamnejad, J. (2015). Simulating the propagation of hydraulic fractures from a circular wellbore using the Displacement Discontinuity Method. International Journal of Rock Mechanics and Mining Sciences, 80, 281-291.
[12] Yousefian, H., Soltanian, H., Marji, M. F., Abdollahipour, A., & Pourmazaheri, Y. (2018). Numerical simulation of a wellbore stability in an Iranian oilfield utilizing core data. Journal of Petroleum Science and Engineering, 168, 577-592.
[13] Mogi, K. (1971). Fracture and flow of rocks under high triaxial compression. Journal of Geophysical Research, 76(5), 1255-1269.
[14] Takahashi, M., & Koide, H. (1989, January). Effect of the intermediate principal stress on strength and deformation behavior of sedimentary rocks at the depth shallower than 2000 m. In ISRM international symposium. International Society for Rock Mechanics.
[15] Chang, C., & Haimson, B. (2000). True triaxial strength and deformability of the German Continental Deep Drilling Program (KTB) deep hole amphibolite. Journal of Geophysical Research: Solid Earth, 105(B8), 18999-19013.
[16] Haimson, B., & Chang, C. (2000). A new true triaxial cell for testing mechanical properties of rock, and its use to determine rock strength and deformability of Westerly granite. International Journal of Rock Mechanics and Mining Sciences, 37(1-2), 285-296.
[17] Haimson, B. (2006). True triaxial stresses and the brittle fracture of rock. Pure and Applied Geophysics, 163(5-6), 1101-1130.
[18] Oku, H., Haimson, B., & Song, S. R. (2007). True triaxial strength and deformability of the siltstone overlying the Chelungpu fault (Chi‐Chi earthquake), Taiwan. Geophysical research letters, 34(9).
[19] Chang, C., & Haimson, B. (2012). A failure criterion for rocks based on true triaxial testing. In The ISRM Suggested Methods for Rock Characterization, Testing and Monitoring: 2007-2014 (pp. 259-262). Springer, Cham.
[20] Li, X., Du, K., & Li, D. (2015). True triaxial strength and failure modes of cubic rock specimens with unloading the minor principal stress. Rock Mechanics and Rock Engineering, 48(6), 2185-2196.
[21] Mogi, K. (2007). Experimental rock mechanics (Vol. 3). CRC Press.
[22] Kwasniewski, M., Li, X., & Takahashi, M. (Eds.). (2012). True triaxial testing of rocks (Vol. 4). CRC Press.
[23] Sriapai, T., Walsri, C., & Fuenkajorn, K. (2013). True-triaxial compressive strength of Maha Sarakham salt. International Journal of Rock Mechanics and Mining Sciences, 61, 256-265.
[24] Kapang, P., Walsri, C., Sriapai, T., & Fuenkajorn, K. (2013). Shear strengths of sandstone fractures under true triaxial stresses. Journal of Structural Geology, 48, 57-71.
[25] Kaunda, R. (2014). New artificial neural networks for true triaxial stress state analysis and demonstration of intermediate principal stress effects on intact rock strength. Journal of Rock Mechanics and Geotechnical Engineering, 6(4), 338-347.
[26] Hao, T. S., & Liang, W. G. (2016). A new improved failure criterion for salt rock based on energy method. Rock Mechanics and Rock Engineering, 49(5), 1721-1731.