[1] Esaki, T. S. Du, Y. Mitani, K. Ikusada, and Li Jing. "Development of a shear-flow test apparatus and determination of coupled properties for a single rock joint." International Journal of Rock Mechanics and Mining Sciences 36, no. 5 (1999): 641-650.
[2] Olsson, R., and N. Barton. "An improved model for hydromechanical coupling during shearing of rock joints." International journal of rock mechanics and mining sciences 38, no. 3 (2001): 317-329.
[3] Lee, H. S., and T. F. Cho. "Hydraulic characteristics of rough fractures in linear flow under normal and shear load." Rock mechanics and rock engineering 35, no. 4 (2002): 299-318.
[4] Li, Bo, Yujing Jiang, Tomofumi Koyama, Lanru Jing, and Yoshihiko Tanabashi. "EX perimental study of the hydro-mechanical behavior of rock joints using a parallel-plate model containing contact areas and artificial fractures." International Journal of Rock Mechanics and Mining Sciences 45, no. 3 (2008): 362-375.
[5] Koyama, Tomofumi, Yuzo Ohnishi, and Lanru Jing. "Numerical modeling for fluid flow and particle transport in rock fractures during shear." (2008).
[6] Mehranpour, M. H. "Introduction of new roughness parameters to quantify rock joints surface using Fourier analysis." In 50th US Rock Mechanics/Geomechanics Symposium. American Rock Mechanics Association, 2016.
[7] Yu, Qifeng. "Computational Simulations of Shear Behaviour of Joints in Brittle Geomaterials." PhD diss., McGill University Libraries, 2001.
[8] Kulatilake, P. H. S. W., J. Um, and George Pan. "Requirements for accurate estimation of fractal parameters for self-affine roughness profiles using the line scaling method." Rock mechanics and rock engineering 30, no. 4 (1997): 181-206.
[9] Yeo, I. W., M. H. De Freitas, and R. W. Zimmerman. "Effect of shear displacement on the aperture and permeability of a rock fracture." International Journal of Rock Mechanics and Mining Sciences 35, no. 8 (1998): 1051-1070.
[10] Kim, Hyung-Mok, Junya Inoue, and Hideyuki Horii. "Flow analysis of jointed rock masses based on eX cavation-induced transmissivity change of rough joints." International Journal of Rock Mechanics and Mining Sciences 41, no. 6 (2004): 959-974.
[11] Neretnieks, Ivars, Tryggve Eriksen, and Päivi Tähtinen. "Tracer movement in a single fissure in granitic rock: Some eX perimental results and their interpretation." Water resources research 18, no. 4 (1982): 849-858.
[12] Crandall, Dustin, Grant Bromhal, and Zuleima T. Karpyn. "Numerical simulations eX amining the relationship between wall-roughness and fluid flow in rock fractures." International Journal of Rock Mechanics and Mining Sciences 47, no. 5 (2010): 784-796.
[13] Zhao, Zhihong, Lanru Jing, Ivars Neretnieks, and Luis Moreno. "Analytical solution of coupled stress-flow-transport processes in a single rock fracture." Computers & geosciences 37, no. 9 (2011): 1437-1449.
[14] Figueiredo B, Tsang CF, Rutqvist J, Niemi A. A study of changes in deep fractured rock permeability due to coupled hydro-mechanical effects. International Journal of Rock Mechanics and Mining Sciences. 2015 Oct 31;79:70-85.
[15] Elsworth, Derek. "Some THMC controls on the evolution of fracture permeability." In Elsevier Geo-Engineering Book Series, vol. 2, pp. 63-71. Elsevier, 2004.
[16] Mohtarami, E., A. Baghbanan, M. Akbariforouz, H. Hashemolhosseini, and E. Asadollahpour. "Chemically dependent mechanical properties of natural andesite rock fractures." Canadian Geotechnical Journal 55, no. 6 (2018): 881-893.
[17] Asadollahpour E, "Investigating the effect of chemicals on the properties and fluid flow in rock fractures using experimental and Numerical Methods", PhD Thesis, IUT, 2018, (In Persian).
[18] Asadollahpour, E., A. Baghbanan, H. Hashemolhosseini, and E. Mohtarami. "The etching and hydraulic conductivity of acidized rough fractures." Journal of Petroleum Science and Engineering 166 (2018): 704-717.
[19] Jia, Cunqi, Kamy Sepehrnoori, Zhaoqin Huang, Haiyang Zhang, and Jun Yao. "Numerical studies and analysis on reactive flow in carbonate matriX acidizing." Journal of Petroleum Science and Engineering 201 (2021): 108487.
[20] Jia, Cunqi, Zhaoqin Huang, Kamy Sepehrnoori, and Jun Yao. "Modification of two-scale continuum model and numerical studies for carbonate matriX acidizing." Journal of Petroleum Science and Engineering 197 (2021): 107972.
[21] Panga, Mohan KR, Murtaza Ziauddin, and Vemuri Balakotaiah. "Two‐scale continuum model for simulation of wormholes in carbonate acidization." AIChE journal 51, no. 12 (2005): 3231-3248.
[22] Aljawad, Murtada Saleh, Mateus Palharini Schwalbert, Mohamed Mahmoud, and Abdullah Sultan. "Impacts of natural fractures on acid fracture design: A modeling study." Energy Reports 6 (2020): 1073-1082.
[23] Lu, Cong, Xiang Bai, Yang Luo, and Jianchun Guo. "New study of etching patterns of acid-fracture surfaces and relevant conductivity." Journal of Petroleum Science and Engineering 159 (2017): 135-147.
[24] Qi, Ning, Guobin Chen, Lin Pan, Mingyue Cui, Tiankui Guo, Jun Yan, and Chong Liang. "Numerical simulation and analysis of fracture etching morphology during acid fracturing of dolomite reservoirs." Chemical Engineering Science 229 (2021): 116028.
[25] Lu, Cong, Li Ma, Jianchun Guo, Senwen Xiao, Yunchuan Zheng, and Congbin Yin. "Effect of acidizing treatment on microstructures and mechanical properties of shale." Natural Gas Industry B 7, no. 3 (2020): 254-261.
[26] Javadi, M., Sharifzadeh, M. and Shahriar, K., 2010. A new geometrical model for non-linear fluid flow through rough fractures. Journal of Hydrology, 389(1-2), pp.18-30.
[27] Koyama, T., Li, B., Jiang, Y. and Jing, L., 2008. Coupled shear-flow tests for rock fractures with visualization of the fluid flow and their numerical simulations. International Journal of Geotechnical Engineering, 2(3), pp.215-227.
[28] Watanabe, N., Hirano, N. and Tsuchiya, N., 2008. Determination of aperture structure and fluid flow in a rock fracture by high‐resolution numerical modeling on the basis of a flow‐through experiment under confining pressure. Water Resources Research, 44(6).
[29] Zimmerman, R.W. and Bodvarsson, G.S., 1996. Hydraulic conductivity of rock fractures. Transport in porous media, 23(1), pp.1-30.
[30] Pyrak-Nolte, L.J. and Morris, J.P., 2000. Single fractures under normal stress: The relation between fracture specific stiffness and fluid flow. International Journal of Rock Mechanics and Mining Sciences, 37(1-2), pp.245-262.
[31] Watanabe, N., Hirano, N. and Tsuchiya, N., 2009. Diversity of channeling flow in heterogeneous aperture distribution inferred from integrated experimental‐numerical analysis on flow through shear fracture in granite. Journal of Geophysical Research: Solid Earth, 114(B4).
[32] Koyama, T., Li, B., Jiang, Y. and Jing, L., 2009. Numerical modelling of fluid flow tests in a rock fracture with a special algorithm for contact areas. Computers and Geotechnics, 36(1-2), pp.291-303.
[33] S. R. J. J. o. G. R. S. E. Brown, "Fluid flow through rock joints: the effect of surface roughness," Journal of Geophysical Research: Solid Earth, vol. 92, no. B2, pp. 1337-1347, 1987.