[1] Tan, X.C.,Kou, S.Q&Lindqvist, P.A (1998)Application of The DDM And Fracture Mechanics Model OnTheSimulation of Rock Breakage by Mechanical Tools, Engineering Geology, 49,277284
[2] Rostami, J., Ozdemir, L., 1993. A new model for performance prediction of hard rock TBMs. In: Proceedings, Rapid Excavation and Tunneling Conference (RETC), pp.793–809
[3] Acaroglu, O., Ozdemir, L., Asbury, B., 2008. A fuzzy logic model to predict specific energy requirement for TBM performance prediction. Tunn.Undergr. Space Technol. 23 (5), 600–608.
[4] Optimum spacing of TBM disc cutters: A numerical simulation usingthe three-dimensional dynamic fracturing method, Jung-Woo Cho, SeokwonJeon, Sang-Hwa Yu, Soo-Ho Chang Tunnelling and Underground Space Technology 25 (2010) 230–244
[5] Guo H., Aziz N. I., and Schmidt R. A., (1992) ‘Rock Cutting Study Using Linear Elastic Fracture Mechanics’; Engng. Fract. Mech., Vol. 41, pp. 771-778.
[6] Scavia C. (1992) ‘A Numerical Technique for the Analysis of Cracks Subjected to Normal Compressive Stresses’ Int. j. Numer. Meth.Engng., Vol. 33, pp. 929-942.
[7] Shen B. and Stephansson O. (1994) ‘Modification of the G-criterion for Crack Propagation Subjected to Compression’, Engng. Fract. Mech., Vol. 47(2), pp. 177-189.
[8] Rosmanith H. P., (1983), Rock Fracture Mechanics, Springer Verlagwien, New York Applications, Elsevier, Netherlands.
[9] Aliabadi M. H., (1998), Fracture of Rocks, Computational Mechanics Publications, Southampton, U.K.
[10] Bobet A. (2001), 'A Hybridized Displacement Discontinuity Method for Mixed Mode I-II-III Loading', Int. J.Rock Mech. Min. Sci., Vol. 38, pp. 1121-1134.
[11] Shen B., Stephansson O., Rinne M., Lee H-S, Jing L., and Roshoff K., (2004) ‘A Fracture Propagation Code and Its Application to Nuclear Waste Disposal’, Int. J. Rock Mech. Min. Sci., Vol. 41,No 3. pp. 448-453.Mohammad FatehiMarji, et. al
[12] Marji M. F., Hosseinin_Nasab H., Kohsary A. H., (2006) 'On the Uses of Special Crack Tip Elements in Numerical Rock Fracture Mechanics', Int. j Solids and Structures Vol.43 pp. 1669-1692.
[13] Shen B. and Stephansson O. (1994) ‘Modification of the G-criterion for Crack Propagation Subjected to Compression’, Engng. Fract. Mech., Vol. 47(2), pp. 177-189.
[14] Erdogam F., and Sih G. C. (1963) ‘On the Crack Extension in Plates Under Plane Loading and transverse Shear’; J. Bas. Engng, Vol. 85, pp. 519-527.
[15] Ingraffea A. R., (1983) ‘Numerical Modeling of Fracture Propagation’; Rock Fracture Mechanics; Rossmanith H. P.(Ed.); Springer Verlagwien; New York, pp. 151-208.
[16] Stephansson O. (2002) ‘Recent Rock Fracture Mechanics Developments’; 1st Iranian Rock Mechanics Conference, pp. 675-698.
[17] Whittaker B. N., Singh R. N., and Sun G. (1992) Rock Fracture Mechanics, Principles, Design and Applications, Elsevier, Netherlands.
[18] Erdogan F., and Sih G. C. (1963) ‘On the Crack Extension in Plates Under Plane Loading and transverse Shear’; J. Bas. Engng, Vol. 85, pp. 519-527.
[19] Bobet A. (2001), 'A Hybridized Displacement Discontinuity Method for Mixed Mode I-II-III Loading', Int. J. Rock Mech. Min. Sci., Vol. 38, pp. 1121-1134.
[20] Carpinteri A., and Yang G. (1997), 'Size effects in brittle specimen with microcrack interaction', Computers and Structures, 63, pp. 429-437.
[21] FatehiMarji, M.; Hosseini-nasab, H. and Kohsary, A. H., (2007), "A New Cubic Element Formulation of the Displacement Discontinuity Method using Three Special Crack Tip Elements for Crack Analysis", JP Journal ofSolids and Structures, Vol. 1, pp. 61-91
[22] Marji M. F., and Dehghani E., (2010) Kinked Crack Analysis by A Hybridized Boundary Element/BoundaryCollocation Method', Int. j Solids and Structures Vol.47 pp. 922-933.