[1] Ivars, M. (2006), Water inflow into excavations in fractured rock-a three-dimensional hydro-mechanical numerical study. International Journal of Rock Mechanics and Mining Sciences, 43, 705-725.
[2] Levasseur, L., Charlier, R., Frieg, B., & Collin, F. (2010). Hydro-mechanical modelling ofthe excavation damaged zone around an underground excavation at Mont Terri Rock Laboratory. International Journal of Rock Mechanics and Mining Sciences, 43, 414-425.
[3] Chen, H. M., Zhao, Z. Y., Choo, L. Q., & Sun, J. P. (2015). Rock cavern stability analysis under different Hydro-Geological conditions using the coupled Hydro-Mechanical model, Rock Mechanics and Rock Engineering.
[4] Li, L., Liu, H. H. (2015). EDZ formation and associated hydromechanical behaviour around ED-B tunnel: A numerical study based on a two-part Hooke’s model (TPHM). KSCE Journal of Civil Engineering, 19(1), 318-331.
[5] Baghbanan, A. (2008), Scale and stress effects on Hydro-Mecanical properties of fractured rock masses. PhD thesis, Supervisor: Lanru Jing, Royal Institute of Technology (KTH), Stockholm, Sweden.
[6] Min, K. B., Rutqvist, J., Tsang, Ch. F., & Jing, L. (2004). Stress-dependent permeability of fractured rock masses: a numerical study. International Journal of Rock Mechanics and Mining Sciences, 41, 1191-1210.
[7] Rejeb, A., Bruel, D. (2001), Hydromechanical effects of shaft sinking at the Sellafield site. International Journal of Rock Mechanics and Mining Sciences, 38, 17-29.
[8] Min, K. B., Jing, L., & Stefansson, O. (2004), Determining the equivalent permeability tensor for fractured rock masses using a stochastic REV approach: Method and application to the field data from Sellafield, UK. Hydrogeology Journal, 12, 497-510.
[9] Figueiredo, B., Tsang, Ch. F., Rutqvist, J., & Niemi, A. (2015). A study of changes in deep fractured rock permeability due to coupled hydro-mechanical effects. International Journal of Rock Mechanics and Mining Sciences, 79, 70-85.
[10] Souley, M., Lopez, Ph., Boulon, M., & Thoraval, A. (2015). Experimental Hydromechanical Characterization and Numerical Modelling of a Fractured and Porous Sandstone. Rock Mechanics and Rock Engineering, 48, 1143-1161.
[11] Selvadurai, A.P.S. (2015), Normal stress-induced permeability hysteresis of a fracture in a granite cylinder. Geofluids, 15, 37-47.
[12] Mirzaei-Paiaman, A., Nourani, M. (2012). Positive effect of earthquake waves on well productivity: Case study: Iranian carbonate gas condensate reservoir. Scientia Iranica C, 19(6), 1601-1607.
[13] Huh, C. (2006).,Improved oil recovery by seismic vibration: a preliminary assessment of possible mechanisms, In first International Oil Conference and Exhibition in Mexico. Cancun, Mexico.
[14] Kouznetsov, O. L., Simkin, E. M., Chilingar, G. V., & Katz, S. A. (1998), Improved oil recovery by application of vibro-energy to waterflooded sandstones. Journal of Petroleum Science and Engineering, 19, 191-200.
[15] Candela, T. H., Brodsky, E. E., Marone, C. H., & Elsworth, D. (2014), Laboratory evidence for particle mobilization as a mechanism for permeability enhancement via dynamic stressing. Earth and Planetary Science Letters, 392, 279-291.
[16] Joolaie, A. and A. Baghbanan (2013), "3D modeling of fluid transmission network in jointed rocks using pipe network model and discrete element method.”, 9th international civil engineering congress, Isfahan University of Technology, Isfahan, Iran (in Persian).
[17] Baghbanan, A., Jing, L. (2007), Hydraulic properties of fractured rock masses with correlated fracture length and aperture. International Journal of Rock Mechanics and Mining Sciences, 44, 704-719.
[18] Baghbanan, A., Jing, L. (2008). Stress effects on permeability in a fractured rock mass with correlated fracture length and aperture. International Journal of Rock Mechanics and Mining Sciences, 45, 1320-1334.
[19] Blum, Ph., Mackay, R., Riley, M. S., & Knight, J. L. (2005). Performance assessment of a nuclear waste repository: Upscaling coupled hydro-mechanical properties for far-field transport analysis. International Journal of Rock Mechanics and Mining Sciences, 42, 781-792.
[20] Bhasin, R., Kaynia, A. M. (2004), Static and dynamic simulation of a 700-m high rock slope in western Norway, Engineering Geology, 71, 213-226.
[21] Choi, S. O., Chung, S. K. (2004). Stability analysis of jointed rock slopes with the Barton-Bandis constitutive model in UDEC, International Journal of Rock Mechanics and Mining Sciences. 41, 469-475.
[22] Itasca Consulting Group, Inc, (2000). (UDEC) Universal Distinct Element Code (Version 3.1) User's Guide, Minneapolis, Minnesota.
[23] Sobhani, E. (2012). "Numerical analysis of blast induced waves propagation in continuous and discontinuous media.” MSc thesis, Supervisors: Mahmood Vafaian and Alireza Baghbanan, Isfahan University of Technology (IUT), Department of civil engineering (in Persian).