[1] Palmstrom, A. and R. Singh, (2001), "The deformation modulus of rock masses - comparisons between in situ tests and indirect estimates", Tunnelling and Underground Space Technology, 16(3), 115-131.
[2] Sonmez, H., Gokceoglu, C., Nefeslioglu, H. A., & Kayabasi, A., (2006), "Estimation of rock modulus: For intact rocks with an artificial neural network and for rock masses with a new empirical equation", International Journal of Rock Mechanics and Mining Sciences, 43, 224-235.
[3] Hoek, E. and M. S. Diederichs, (2006), "Empirical estimation of rock mass modulus", International Journal of Rock Mechanics and Mining Sciences, 43, 203-215.
[4] Barton, N., (2002), "Some new Q-value correlations to assist in site characterisation and tunnel design", International Journal of Rock Mechanics and Mining Sciences, 39, 185-216.
[5] Palmstrom, A., (1996), "Characterizing rock masses by RMi for use in practical rock engineering(Part1: the development of the rock mass index(RMi))", Tunnelling and Underground Space Technology, 11(2), 175-188.
[6] Deere, D. U. (1989). "Rock quality designation(RQD) after twenty years ", U.S. Army crops of engineering: 67.
[7] Gokceoglu, C., Sonmez, H., & Kayabasi, A., (2003), "Predicting the deformation moduli of rock masses", International Journal of Rock Mechanics and Mining Sciences, 40, 701-710.
[8] Zhang, L. and H. H. Einstein,(2004), "Using RQD to estimate the deformation modulus of rock masses", International Journal of Rock Mechanics and Mining Sciences, 41, 337-341.
[9] Kayabasi, A., Kayabasi, A., Gokceoglu, C., & Ercanoglu, M., (2003), "Estimating the deformation modulus of rock masses: a comparative study", International Journal of Rock Mechanics and Mining Sciences, 40, 55-63.
[10] Hoek, E., Carranza-Torres, C., & Corkum, B., (2002), "Hoek- Brown failure criterion- 2002 edition", North American Rock Mechanicss Society Meeting, Torento, Canada.
[11] Nejati, H. R., Ghazvinian, A., Moosavi, S. A., & Sarfarazi, V., (2014), "On the use of the RMR system for estimation of rock mass deformation modulus", Bulletin of Engineering Geology and Environment, 73(2), 531-540.
[12] Palmstrom, A. (1995). "RMi - a rock mass characterization system for rock engineering purposes", Oslo, University of Oslo, Ph.D: 381.
[13] Sonmez, H., Gokceoglu, C., & Ulusay, R., (2004), "Indirect determination of the modulus of deformation of rock masses based on the GSI system", International Journal of Rock Mechanics and Mining Sciences, 41, 849–857.
[14] Carvalho, J.,(2004), "Estimation of rock mass modulus", Personal comminucation.
[15] Shen, J., Karakus, M., & Xu, C., (2012), "A comparative study for empirical equations in estimating deformation modulus of rock masses", Tunnelling and Underground Space Technology, 32, 245-250.
[16] Lowson, A. R. and Z. T. Bieniawski (2013). "Critical Assessment of RMR based Tunnel Design Practices: a Practical Engineer’s Approach", RAPID EXCAVATION & TUNNELING, Washington, DC: 180-189.
[17] Goodman, R. E., Van, T. K., & Heuze, F. E., (1968), "Measurement Of Rock Deformability In Boreholes", The 10th U.S. Symposium on Rock Mechanics (USRMS), Austin, Texas.
[18] Kavur, B., Cvitanović, N. Š., & Hrženjak, P.,(2015), "Comparison between plate jacking and large flat jack test results of rock mass deformation modulus", International Journal of Rock Mechanics and Mining Sciences, 73, 102-114.
[19] ISRM, (1978), "Suggested Methods for Determining In Situ Deformability of Rock", ISRM Commission on Standardization of Laboratory and Field Tests,
[20] ASTM, (2008), "Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Mass Using the Rigid Plate Loading Method", West Conshohocken, United States, D 4394 – 08.
[21] ISRM,(1979), "Suggested methods for determining in-situ deformability of rock- Part I: Suggested method for deformability determination using a plate test", International Journal of Rock Mechanics Mining Sciences and Geomechanics, 16, 197-202.
[22] ASTM, (1998), "Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Mass Using the Flexible Plate Loading Method", West Conshohocken, United States, D 4395 – 98.
[23] Unal, E.,(1997), "Determination of in-situ deformation modulus: New approaches for plate loading tests", International Journal of Rock Mechanics and Mining Sciences, 34, 897-915.
[24] Palmstrom, A. (2009). "Combining the RMR, Q, and RMi classification systems." from www.rockmass.net.
[25] Singh, B. and R. K. Goel, (2011), "Engineering Rock Mass Classification, Tunneling, Foundations, and Landslides", Waltham, Elsevier Inc.
[26] Hoek, E., Carter, T. G., & Diederichs, M. S., (2013), "Quantification of the Geological Strength Index Chart", 47th U.S. Rock Mechanics /Geomechanics Symposium, San Francisco, California American Rock Mechanics Association.
[27] Rahimi, B., Shahriar, K., & Sharifzadeh, M., (2014), "Evaluation of rock mass engineering geological properties using statistical analysis and selecting proper tunnel design approach in Qazvin–Rasht railway tunnel", Tunnelling and Underground Space Technology, 41, 206-222.
[28] David, H. A. and J. L. Gunnink,(1997), "The Paired t Test Under Artificial Pairing", The American Statistician, 51(1), 9-12.