[1] Lynarczuk M. (2010),"Description and Classification of Rock Surface by Means of Laser Profilometry and Mathematical Morphology", International Journal for Rock Mechanics and Mining Science, Vol. 47, no. 1, pp. 138-149.
[2] Cap P.; Jia H. Q.; Liu T. Y., and Fan X., (2011),"Practical Analysis of Three-dimensional Topography Characteristics of Rock Joint Surface," Chinese Journal of Rock Mechanics and Engineering, Vol. 30, no. 2, pp. 3839-3843, China.
[3] Barton N. (1973), "Review of a New Shear-strength Criterion for Rock Joints," Engineering Geology, Vol. 7, no. 4, pp. 287-332.
[4] Barton N. and Choubey V. (1977),"The Shear Strength of Rock Joints in Theory and Practice," Rock Mechanics Felsmechanik Mecanique des Roches, Vol. 10, no. 1-2, pp. 1-54.
[6] Geerisema A. I. (2002),"The Shear Strength of Planar Joints in Mudstone," International Journal of Rock Mechanics and Mining Sciences, Vol. 39, no. 8, pp. 1045-1049.
[7] Brown E. T. (1981)," Rock Characterization, Testing and Monitoring ISRM Suggested Methods," pp. 15-16, Pergamon Press, Oxford, UK.
[8] Shigui Du., Yunjin Hu. and Xiaofei Hu (2014),"Generalized Models for Rock Joint Surface Shapes,” The Scientific World Journal, Hindawi, Vol. 14, pp. 1-8.
[9] Cruden D. M. (1999),"Describing the size of discontinuities", International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, 14:133-137.
[10] Priest S. D. (1993),"Discontinuity analysis for rock engineering", Published by Chapman & Hall, London.
[11] Warburton P. W. (1980),"Stereological interpretation of joint trace data: influence of joint shape and implications for geological surveys", International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Vol. 17, Issue 6, Dec., pp. 305-316.
[12] Chan L. Y. (1986),"Application of block theory and simulation techniques to optimum design of rock excavations", Ph. D. Theses, university of California, Berkeley, CA.
[13] Villaescusa E. and Brown E. T. (1992),"Maximum likelihood estimation of joint size from trace length measurements", Rock Mech. & Rock Eng. 25, pp. 67-87.
[14] Kulatilake P. H. S. W. (1993),"Application of probability and statistics to joint network modeling in three dimensions", An invited paper to appear in the Proc. Of the Conf. on Probabilistic Methods in Geotechnical Engineering, Canberra, Australia, 25 pp.
[15] Hudson J. A. and Priest S. D. (1983),"Discontinuity frequency in rock masses", International Journal of Rock Mechanics and Mining Science and Geomechanics Abstract; 20: pp. 73-89.
[16] Dershowitz W. S. and Einstein H. H. (1988),"Characterizing rock joint geometry with joint system models", Rock Mechanics and Rock Engineering, Springer-Verlag, New York, Vol. 21, pp. 21-25.
[17] Ivanova V. (1998),"Geologic and stochastic modeling of fracture system in rocks", Ph. D. Theses, MIT.
[18] Meyer T. (1999),"Geological stochastic modeling of rock fracture systems related to crustal faults", Thesis MIT.
[19] Dershowitz W. S., Lee G., Geier J., Hitchcock S. and La Point P. (1993),"User documentation: FracMan discrete feature data analysis", Geometric Modeling and Exploration Simulations. Golder Associates, Seattle, USA.
[20] Zhang L., Einstein H. H. and Dershowitz W. S. (2002),"Stereological relationship between trace length and size distribution of elliptical discontinuities", Geotechnique, 52(6) pp. 419-433.
[21] Zhang L. and Einstein H. H. (2010),"The planar shape of rock joint", Rock Mechanics and Rock Engineering, Vol. 43, Issue 1, pp. 55-68.
[22] Baraka-Lokmane S. (2002),"A New Resin Impregnation Technique for Characterizing fracture Geometry in Sandstone Cores," International Journal of Rock Mechanics & Mining Sciences, Pergamon, Vol. 39 pp. 815–823.