[1] Moorak, S., & Cording, E. J. (2007). Ground–liner interaction in rock tunneling. Tunnelling and Underground Space Technology, 22(1), 1-9.
[2] Stille, H., & Palmstrom, A. (2008). Ground behaviour and rock mass composition in underground excavations. Tunnelling and Underground Space Technology, 23(1), 46-64.
[3] Hoek, E. (2011). Cavern Reinforcement and Lining Design. prepared for RocNews.
[4] Li, S., Yu, H., Liu, Y., & Wu, F. (2008). Results from in-situ monitoring of displacement, bolt, load and disturbed zone of a powerhouse cavern during excavation process. International Journal of Rock Mechanics and Mining Sciences, 45(8), 1519-1525.
[5] Martin, C. D., Kaiser, P. k., & Christiansson, R. (2003). Stress, instability and design of underground excavations. International Journal of Rock Mechanics and Mining Sciences, 40(7-8), 1027-1047.
[6] Hoek, E. (2007). Practical Rock Engineering. British Columbia, Canada.
[7] Cai, Y., Esaki, T., & Jiang, Y. (2004). A rock bolt and rock mass interaction model. International Journal of Rock Mechanics and Mining Sciences, 41(7), 1055-1067.
[8] Hoek, E. (1999). Support for very weak rock associated with faults and shear zones. The International Symposium on Rock Support and Reinforcement Practice in Mining, Kalgoorlie, Australia.
[9] Zhu, W. S., Sui, B., Li, X. J., & Li, s. c. (2008). A methodology for studying the high wall displacement of large scale underground cavern complexes and its applications. Tunnelling and Underground Space Technology, 23, 651-664.
[10] Malmgren, L., & Nordlund, E. (2008). Interaction of shotcrete with rock and rock bolts- A numerical study. International Journal of Rock Mechanics and Mining Sciences, 45(4), 538-553.
[11] Ghafoori, M., Lashkaripoor, Gh., & Tarigh, S. (2008). Evaluation of geomechanical properties in the headrace tunnel rock masses of Daroongar dam in order to determining of support system. Journal of Iranian Association of Engineering Geology, 1(2), 1-14.
[12] Moeini, E., Hosseini, M., Sharifi, M., & Ebtekar, S. (2010). Stability analysis and design of support system of headrace tunnels of Gotvand dam. Iranian Journal of Mining Engineering, 5(10), 91-96.
[13] Gurocak, Z. (2011). Analyses of stability and support design for a diversion tunnel at the Kapikaya dam site, Turkey. Bull Eng Geol Environ, 70, 41-52.
[14] Jiang, Q., & Feng, X. (2011). Intelligent Stability Design of Large Underground Hydraulic Caverns, Chinese Method and Practice, 4, 1542- 1562.
[15] Ahmadi, A., Shahriar, K., & Asadi, A. (2013). Stability analysis of Amirkabir water conveyance tunnel in strain softening condition using self-similarity method and convergence-confinement curves. Tunneling & Underground Space Engineering, 2(1), 37-48.
[16] Kumar Shrestha, P., & Kanta Panthi, K. (2014). Analysis of the plastic deformation behavior of schist and schistose mica gneiss at Khimti headrace tunnel, Nepal. Bull Eng Geol Environ, 73, 759-773.
[17] Lamas, L. N., Leitao, N. S., Esteves, C., & Plasencia, N. (2014). First infilling of the Venda Nova II unlined high-pressure tunnel: observed behaviour and numerical modelling. Rock Mechanics & Rock Engineering, 47, 885-904.
[18] Dehghani, B., Faramarzi, L., & Sanei, M. (2015). Stability analysis of powerhouse caverns of Bakhtiary dam using 3DEC software. Analytical and Numerical Methods in Mining Engineering, 4(8), 95-108.
[19] Iran Water & Power Resources Development Co. (2007). Engineering Geology Report. Rudbar Lorestan Dam and Powerhouse Plan, Second Phase Studies.
[20] Iran Water & Power Resources Development Co. (2007). Laboratory Tests Report of Rock Mechanics for Rudbar Dam and Powerhouse and Geomechanical Parameters of Dam and Head Race Tunnel. Rudbar Lorestan Dam and Powerhouse Plan, Second Phase Studies.
[21] Behzadi-Nezhad, H. (2011). Stability Analysis and Support System Design of Bifurcation of Penstock Tunnels with Rudbar Dam Powerhouse Headrace Tunnel, M.Sc. Thesis, Department of Mining Engineering, Isfahan University of Technology.
[22] Aksoy, C. O., Kantarci, O., & Ozacar, V. (2010). An example of estimating rock mass deformation around an underground opening using numerical modeling. International Journal of Rock Mechanics & Mining Sciences, 47, 272-278.
[23] Ren, G., Smith, J.V., Tang, J.W., &Xie, Y. M. (2005). Underground excavation shape optimization using an evolutionary procedure. Computers and Geotechnics, 32, 122-132.
[24] Huang, Z., Broch, E., & Lu, M. (2002). Cavern roof stability- mechanism of arching and stabilization by rockbolting. Tunnelling and Underground Space Technology, 17, 249-261.
[25] Tezuka, M., & Seoka, T. (2003). Latest technology of underground rock cavern excavation in Japan. Tunnelling and Underground Space Technology, 18,127-144.