[1] Liu CZ, Qin DT, Liao YH Dynamic analysis for the cutting electromechanical transmission system in the long-wall shearer. J Mech Eng (2016) 52 (7):14–22.
[2] Qin DT, Wang Z, Hu MH et al. Dynamic matching of optimal drum movement parameters of shearer based on multiobjective optimization. J China Coal Soc (2015) 40(2):532–539.
[3] Report of Technical Office of Mine no one Mechanized Parvadeh Tabas", 1397.
[4] Shu RZ, Liu ZJ, Liu CZ et al. Load sharing characteristic analysis of the short driving system in the long-wall; shearer. J Vibroeng (2015) 17(7):3572–3585.
[5] Ge SS, Qin DT, Hu MH Research on drum shearer speed control strategies under impact conditions. J China Coal Soc (2015) 40(11):2569–2578.
[6] Ma ZL Modelling and simulation on shearer self-adaptive memory cutting. Procedia Eng (2012) 37(4):37–41.
[7] Sahoo R, Mazid AM Application of Opto-tactile sensor in shearer machine design to recognize rock surfaces in underground coal mining. In: IEEE international conference on industrial technology Victoria, (2009) pp 1–6
[8] Ma ZL Study on key technology of shearer with variable speed cutting. Ph.D. Dissertation, China University of Mining and Technology (2009).
[9] Liu SY Research on cutting performance of shearer drum and cutting system dynamics. Ph.D. Dissertation, China University of Mining and Technology (2009).
[10] Liu SY, Du CL, Cui XX. Model test of the cutting properties of a shearer drum. Mining Sci Technol 2009; 19(1):74–8
[11] Z.-P. Xu and Z.-B. Wang, “Characteristic analysis of shearer cutting load based on particle filter,” Journal of the China Coal Society, (2011) vol. 36, no. 4, pp. 696–700.
[12] Fang XQ, Zhao JJ, Hu Y, Tests and error analysis of a self- positioning shearer operating at a manless working face, Min. Sci. Techno. (2010) 20 (1):53–58.
[13] Liu CS, Yu XW, Ren CY The drum shearer working bodies. Harbin Engineering University Press, Harbin (2010).