[1] Barton N, Choubey V. 1977. “The shear strength of rock joints in theory and practice”. Rock Mech and rock engineering.10:1–54.
[2] Bandis S, Lumsden AC, Barton NR. 1981. “Experimental studies of scale effects on the shear behavior of rock joints”. Int J Rock Mech Min Sci Geomech Abstr 18(1):1–21.
[3 Hencher, S. R., Toy, J.P., Lumsden, A.C., 1993. “Scale dependent shear strength of rock joints.” Second International Workshop on Scale Effects in Rock Masses. Taylor & Francis, Lisbon, Portugal, pp. 233–240.
[4] Cravero M, Iabichino G, Piovano V. 1995. “Analysis of large joint profiles related to rock slope instabilities”. In: 8th ISRM congress, Tokyo, Japan, 25–29 September 1995. A.A. Balkema, Rotter- dam, pp 423–428.
[5] Cravero M, Iabichino G, Ferrero AM. 2001. “Evaluation of joint roughness and dilatancy of schistosity joints”. In: Sarkka P, Eloranta P (Eds) Rock mechanics—a challenge for society; proceedings of Eurock 2001, Espoo, Finland, 4–7 June 2001.
[6] Leal Gomes, M.J.A., 2003. “Some new essential questions about scale effects on the mechanics of rock mass joints.” 10th ISRM Congress: Technology Roadmap for Rock Mechanics. South African Institute of Mining and Metallurgy, Vila Real, pp. 721–728.
[7] Fardin, N., Stephansson, O., Jing, L., 2001. “The scale dependence of rock joint surface roughness.” Int. J. Rock Mech. Min. Sci. 38, 659–669.
[8] Fardin, N., Feng, Q., Stephansson, O., 2004. “Application of a new in situ 3D laser scanner to study the scale effect on the rock joint surface roughness.” Int. J. Rock Mech. Min. Sci. 41, 329–335.
[9] Fardin N. 2008. “Influence of structural non-stationarity of surface roughness on morphological characterization and mechanical deformation of rock joints”. Rock Mech Rock Eng.
[10] Tatone, B.S.A., Grasselli, G., 2012. “An investigation of discontinuity roughness scale dependency using high-resolution surface measurements. Rock Mech. Rock. Eng. 1–25.
[11] ISRM, 1978. International Society for Rock Mechanics commission on standardization of laboratory and field tests: “suggested methods for the quantitative description of discontinuities in rock masses.” Int J Rock Mech Min Sci Geomech Abstr 15(6): 319–368.
[12] Chae BG, Ichikawa Y, Jeong GC, Seo YS, Kim BC. 2004. “Roughness measurement of rock discontinuities using a confocal laser scanning microscope and the Fourier spectral analysis.” Eng Geol 72(3–4):181–199.
[13] Lee H-S, Ahn K-W. 2004. “A prototype of digital photogrammetric algorithm for estimating roughness of rock surface.” Geosci J 8(3):333–341.
[14] Haneberg W. 2007. “Directional roughness profiles from three- dimensional photogrammetric or laser scanner point clouds.” In: Eberhardt E, Stead D, Morrison T (eds) Rock mechanics: meeting society’s challenges and demands; proceedings of the 1st Canada–US rock mechanics symposium, Vancouver, Can- ada, 27–31 May 2007. Taylor and Francis, London, pp 101–106.
[15] Baker BR, Gessner K, Holden E-J, Squelch AP. 2008. “Automatic detection of anisotropic features on rock surfaces.” Geosph 4(2): 418–428.
[16] Grasselli G, Wirth J, Egger P. 2002. “Quantitative three-dimensional description of a rough surface and parameter evolution with shearing.” Int J Rock Mech Min Sci 39(6):789–800.
[17] Hong ES, Kwon TH, Song KI. Cho GC. 2006. “Observation of the Degradation Characteristics and Scale of Unevenness on Three-dimensional Artificial Rock Joint Surfaces Subjected to Shear.” Rock Mech Rock Eng 49:3–17.
[18] Nasseri MHB, Tatone BSA, Grasselli G, Young RP. 2009. “Fracture toughness and fracture roughness interrelationship in thermally treated Westerly granite.” Pure Appl Geophys 166(5): 801–822.
[19] Lanaro F. 2000. “A random field model for surface roughness and aperture of rock fractures.” Int J Rock Mech Min Sci 37:1195–210.
[20] Belem T, Homand-Etienne F, Souley M. 1997. “Fractal analysis of shear joint roughness.” Int J Rock Mech Min Sci 34: (3–4), Paper No. 130.
[21] Tatone, B.S.A., Grasselli, G., 2009. “A method to evaluate the three-dimensional roughness of fracture surfaces in brittle geomaterials. Rev. Sci. Instrum. 80, 1–10.
[22] Grasselli G. 2001. “Shear strength of rock joints based on quantified surface description.” Ph.D. thesis, Univ. Polytechnique Federale de Lausanne.
[23] Malinverno, A., 1990. “A simplemethod to estimate the fractal dimension of a self-affine series.” Geophys. Res. Lett. 17, 1953–1956. Mas Ivars, D., Pierce, M.E., Darcel, C., Reyes-Montes, J., Potyondy, D.O., Young, R.P.,
[24] Kulatilake PHSW, Um J. 1999. “Requirements for accurate quanti- fication of self-affine roughness using the roughness-length method.” Int J Rock Mech Min Sci 36(1):5–18.
[25] Orey S. 1970. “Gaussian simple functions and Hausdorff dimension of level crossing.” Z. Wahrscheinlichkeitstheor. Verw Gebiete ;15:249–56.
[26] Odling NE. 1994. “Natural fracture profiles, fractal dimension and joint roughness coefficient.” Rock Mech Rock Eng;27:135–53.
[27] Berry MV, Lewis ZV. 1980. “On the Weierstrass-Mandelbrot fractal function.” R Soc London Proc Ser A;370:459–84.
[28] El Soudani, S. M. 1978. “Profilometric analysis of fractures.” Metallography, 11, 247-336.
[29] Lange D. A., Jennings H. M. & Shah S. P. 1993. “Relationship between fracture surface roughness and fracture behaviour of cement paste and mortar.” J. Am. Ceram. Soc., 3, 589-597.
[30] Gokhale, A. M. Underwood E. E. 1990. “A general method for estimation of fracture surface roughness: Part I. Theoretical aspects.” Mechanical Behavior Metallurgical Transactions A. Volume 21, Issue 5, pp 1193-1199.
[31] Lee, H. S. & Ahn, K. W. 2004. “A Prototype of Digital Photogrammetric Algorithm for Estimating Roughness of Rock Surface. Geosciences, 8/ 3: 333-341.
[32] Belem T, Homand-Etienne F, Souley M. 2000. “Quantitative parameters for rock joint surface” roughness. Rock Mech Rock Eng 33(4):217–242.
[33] American standard Association. 1955. “Surface roughness, waviness and lay,” ASA B46.1.
[34] Myers M. O. 1962. “Characterization of surface roughness.” Wear 5, P 182-189.
)