نوع مقاله : مقاله پژوهشی
نویسندگان
دانشکده مهندسی معدن، نفت و ژئوفیزیک، دانشگاه صنعتی شاهرود
چکیده
کلیدواژهها
موضوعات
عنوان مقاله [English]
نویسندگان [English]
Summary
Evaluation of zone dispersed mineralization from blind mineralization in active and inactive mines are the main challenges in mining geochemistry. In this research a new model has been presented for detection of anomaly by integration of singularity and zonality methods. This method shows the depletion and enrichment of vertical zonality index in the study area. Singularity of vertical zonality index was mapped in Kerver2. Results showed blind mineralization in the west of this area.
Introduction
Successive non-linear processes generating frequency distributions with Pareto tails may be related causally such as rainfall and flooding. The total amount of ore and metals in hydrothermal ore deposits often have Pareto tails. Many researches were done for detection of weak anomalies with geophysical and geochemical data. In this paper detection of blind mineralization was done by integration of singularity and zonality methods for the first time in Kerver that located in Jebal- Barez zone.
Methodology and Approaches
Local anomalies of the sub-ore and supra-ore elements were detected in the study area. Area productivity and vertical zonality index were calculated in these local anomalies. Then zonality index was calculated with productivity mention and detection of blind mineralization was done with this index. In addition to the new method presented in this paper (integration of singularity and zonality) were done in this area. The calculation of singularity map was coded in MATLAB programming software. For this purpose a grid map was produced. Values of zonality index were calculated at each point. Then seven square windows set in ranging 100*100 m2, 300*300 m2, 500*500 m2, 700*700 m2, 900*900 m2, 1100* 1100 m2 and 1300*1300 m2. Then the average of zonality index (C[Ari]) was calculated in each window (ri [i=1,3,..., 13]). Straight line for C[Ari] and ri was fitted in log- log plot. Following that, the slope of the straight line was calculated that shows the value of α-2.
Results and Conclusions
Detection of the blind mineralization has been done with zonality method so far. But this method cannot detect the weak blind anomalies and this issue were observed in this study, there is blind mineralization in west of the study area that zonality method could not detect it, whereas integration of singularity and zonality could detect it. Thus integration of singularity and zonality methods is benefit way for recognition of blind mineralization.
کلیدواژهها [English]
در علم فیزیک عبارت تکین یا سینگولار به پدیدههایی اطلاق میشود که دارای شار شدید انرژی یا ماده در المان کوچک فضایی- زمانی باشند. تکینگی به عنوان یک ویژگی مهم در فرایندها یا سیستمهای طبیعی غیرخطی در شاخههای مختلف علوم زمین مثل تشکیل ابرها، سیل، طوفان، رانش زمین و تشکیل ذخایر هیدروترمال است. از نقطه نظر کاربرد زمینشناسی، این ویژگی میتواند به عنوان یک پدیده خاص با مقدار بی هنجاری انرژی رها شده یا مواد تجمع یافته در فاصله زمانی- مکانی کوتاه تعریف شود. در فرایند کانیسازی معمولاً مقدار زیادی عناصر فلزی در مدت زمان کوتاه (در مقایسه با مقیاس زمانی زمینشناسی) و در محدوده کوچکی (نسبت به گسترش زمین) رخ میدهند. همراه با کانیسازی هیدروترمال، فعالیت ماگما همراه با تخلیه و تجمع ماده معدنی است که با تعریف تکینگی مطابقت دارد. اضافه و کم شدن مواد از سنگها اغلب توزیع سینگولار غلظت فلزات را در سنگ میزبان به وجود میآورد[1، 2].